Navigation

Door Controllers

  • Basic Door Controller
    Stacks Image 117
    This basic door controller provides a simple and inexpensive approach to opening and closing the door. It operates by using a forward/reversing contactor and limit switches. We developed this controller with basic door functions, but with options that may be needed to provide additional safety and convenience if necessary. This controller offers compatibility with most industrial door styles. Standard Operation Features:
    • Open constant pressure or momentary
    • Close constant pressure or momentary
    • Motor Overload Protection
    • Open Limit (switch provided by others)
    • Close Limit (switch provided by others)



    The Basic Controller also has the following features:
    • Enclosure size 12"x12"x4"
    • Disconnect handle mounted on the cover of the enclosure
    • Choice of incoming power 120 VAC single phase, 208, 230 or 460 VAC 3 phase
    • Control Power is 24 VAC
    • Will support push button stations
    • Schematics provided with each controller
    Optional:
    • Open, Close and/or Stop buttons mounted on the enclosure door
    • 3 Push Button Station w/ Open, Close and/or Stop buttons pre-wired
    • Safety devices
  • SueMax EN Door Controller
    Stacks Image 125
    Preprogrammed Input Features:
    1. Open Push Button 2. Close Push Button 3. Stop Push Button 4. Safety Edge 5. Photo Eye/Safety 6. Safety Loop/Auto Close Loop 7. Auxiliary Open 8. Radio Control 9. Auto/Hand 10. Door Home Sensor 11. Open Limit 12. Close Limit
    The SueMax EN also has the following features:
    • Door Collision Detection
    • Door Slow Down
    • Power Failure Start up Collision Protection
    • Password Accessible
    • Deactivate Open and Close Buttons on enclosure cover
    • Auto Close Timer
    • If at a later date program modifications are desired, the changes can be made without a field call
    • Choice of incoming power, 120VAC single phase, 230 or 460 VAC Single or Three Phase
    Standard Components:
    • Enclosure size is a 16" x 20" x 6", Nema 4
    • Open, Close and Stop buttons mounted on the cover of the enclosure
    • Auto/Hand Keyed Switch mounted on the cover of the enclosure
    • Disconnect handle mounted on the cover of the enclosure
    • Control Power is 24VDC; this includes a 24VDC Power Supply
    • Encoder for positioning
    • Sensor for full closed position
    • Variable Frequency Drive to control motor speeds and direction
    The SueMax EN Operator will support:
    • Loop Detectors
    • UPS in case of power failure
    • 3-pushbutton Station
    Installation:
    • A setup manual will be provided with every SueMax controller
    • Direct support
  • SueMax LS Door Controller
    Stacks Image 219
    The SueMax LS door controller is designed and programmed for quick and easy setup. It offers compatibility with several different door designs and operators. It has been developed with optimum safety and ease of use in mind. Its design and program offer remote operation, radio control operation, automatic timers, all safety and entry devices, and is simple to upgrade if necessary. The PLC is programmed and ready to go except for a few entries to finalize some of the functions. It operates by means of a Program Logic Controller with HMI, Reversing Contractors and Limit Switches.
    Standard Operation Preprogrammed Input Features:
    1. Open Push Button 2. Close Push Button 3. Stop Push Button 4. Safety Edge 5. Photo Eye/Safety 6. Safety Loop/Auto Close Loop 7. Auxiliary Open 8. Radio Control 9. Auto/Hand 10. Over Load 11. Open Limit 12. Close Limit


    The SueMax LS also has these following components and features:
    • Enclosure size is 16" x 20" x 6" Nema 4
    • Password Accessible
    • Deactivate Open and Close Buttons on enclosure
    • Auto Close Timers
    • Choice of incoming power, 120VAC single phase, 230 or 460VAC Single or Three Phase
    • Control Power is 24VDC
    • Open, Close and Stop buttons mounted on the cover of the enclosure
    • Hand/Auto Keyed Switch mounted on the cover of the enclosure
    • Disconnect handle mounted on the cover of the enclosure
    • Power Failure Start up Collision Protection
    • Motor overload protection
    • If at a later date program modifications are desired, the changes can be made without a field call
    The SueMax LS Operator will support:
    • Loop Detectors
    • UPS in case of power failure
    • 3-pushbutton Stations
    Installation Services:
    • A setup manual is provided with every SueMax LS controller
    • Direct Phone Support